PROPAN NO NAIL PNN-200
PROPAN NO NAIL PNN - 200 is a water based high strength construction adhesive with excellent fast grab and fast clean up that suitable to attach on most building substrate. This high tack adhesive can minimizes or eliminates the need for nails and screw in many DIY and repair jobs. This adhesive has a low odor and requires only soap and water to clean up. This makes it safe, easy to use and environmentally friendly. PROPAN NO NAIL PNN - 200 can be used on most building substrate, including :
- Wood
- MDF
- Particle board
- Plaster board
- Styrene foam
- Masonry & concrete
- Tiles
- Ceramics
- Metal
- Plastic*
- Rubber*
- Glass*
- Skirting
- Cornices
- Architraves
*Pre-test to determine compatibility
Advantages :
- Fast grab
- Eliminates the need for nails
- Waterbased, fast clean up with water (before dry)
- Low odor
Packaging : 200 gr
Application rocedures :
- Ensure all surfaces are clean, dry and free from dust, dirt, oil, grease, and loosely other contaminant.
- Cut the tip of the cartridge, fit nozzle and cut to desired opening (±5-10 mm)
- Apply PROPAN NO NAIL along length of joist, stud, or batten. On board flat surfaces apply PROPAN NO NAIL every 40 cm.
- Bring surfaces together as soon as possible (within the first 5 min)
- For a large area use a temporary clamp or screw till PROPAN NO NAIL dry perfectly.
- For use in a small area use PROPAN NO NAIL on one surface only, then press fully and together. Allow to dry for 15-30 minutes.
- To get the perfect adhesion, remove the temporary clamp or screw after 24 hours. Use a mechanical clip to get the perfect adhesion.
| PROPAN NO NAIL PNN - 200 | |
| Appearance | Colored paste |
| Color | White |
| Chemical type | Acrylic water based |
| Solid by volume | 60 % |
| Specific gravity | 1.40 g/cc |
| Working time | 15 minutes at 30ºC |
| Drying time | 24 hours at 30ºC |
| Full cure | Minimum 7 days (depend on temperature and thickness) |
| Application condition | 25 - 35oC, 60 - 80%RH |
