ULTRAN SUPER ENAMEL USE-60
ULTRAN SUPER ENAMEL USE-60 is a multipurpose clear polyurethane / PU (two components) coating.. Can be used as clear top coat on a wide variety of substrate such as steel/iron, concrete, GRC panel and fiber cement board.
Features & Benefit :
- Weather, algae and fungus resistant
- Abrasion resistant
- Splash mild chemical resistant
- Non-yellowing & non-chalking
- Excellent gloss resistance
- Easy to clean
Color : Clear Gloss & Clear Dof
Packaging : 1 litre-set & 20 litre-set
Application Procedures :
Surface preparation
Clean the surface of substrate from rust, oil and other contaminant.
Application Process
- Stir thoroughly component A ULTRAN SUPER ENAMEL USE-60L, add hardener / component B, with volume ratio 4 : 1. Then stir thoroughly
- Add thinner Polyurethane / PU MD-02 according to application requirement, then stir thoroughly.
- Do not apply this paint mixture after 180 minutes
- Apply this paint mixture ULTRAN SUPER ENAMEL USE-60 by brush / spray / roll.
- Leave it dry minimum 4 hours, before the next step (depends on air temperature and humidity)
| ULTRAN SUPER ENAMEL USE-60 | |
| Mixing ratio | Component A : Component B = 4 : 1 |
| Solid by volume (v/v) | 45 ± 1% |
| Theoretical coverage | 9-10 m2 / litre-set (dry film thickness = 40 microns) |
| Thinner | Propan Thinner Polyurethane / PU MD 02 |
| Application tools (weight) | Airless spray = 5%, spray = 40%, brush/roll = 20% |
| Pot life (30oC) | 180 minutes |
| Drying time (30oC) |
Surface dry = 30 minutes Hard dry = 5 hours |
| Re-coating interval (30oC) | 4-6 hours, after the first coating film already dry |
