IMPRA MELAMINE SYSTEM
IMPRA MELAMINE LACK ML-131 CLEAR is a two components wood finishing system with low formaldehyde levels so relatively odorless spicy and less poignant in the eyes, and can be applied to light colors because it is low yellowing. The system consist of Impra Melamine Sanding Sealer and Impra Melamine Lacquer.
Features & Benefit :
• Low formaldehyde
• Low yellowing
• Good Scratch Resistant
• Good House
Packaging : 1 Lt set, 5 Lt set and 20 Lt set
Video Training Product
Color Card
Application Procedures :
- Sand the wood surface with sandpaper no. 180 in the direction of the wood grain
- Fill the wood pores with IMPRA Wood Filler SH-113. After dry, sand with sandpaper no. 240 until the surface of the wood to be seen again.
- Color the wood surfaces with Wood Stain IMPRA WS-162 B
- Spray evenly IMPRA Melamine Sanding Sealer MSS-123/124 as the base layer. Once dry, sand with sandpaper no. 400. Repeat this step once more.
- Spray evenly IMPRA Lack Melamine ML-131 Clear (Dof / Gloss / Semi Gloss) as the final layer.
CAUTION
After IMPRA Melamine is mixed with hardener, about 6-8 minutes the mixture will begin to jell.
| IMPRA MELAMINE LACK ML-131 CLEAR | |
| Application Method | Spray |
| Thinning (Comp A: B: Thinner) | 9 :1:6 |
| Thinner | THINNER SERBA GUNA PRO |
| Theoritical coverage | 8 m2/lt. at ca 125 g/m2 |
| Drying time | ± 60 minutes |
