PROPAN PU-91
PROPAN PU - 91 is High Quality Non-yellowing PU Acrylic. PROPAN PU - 91 designed for finishing furniture. This PU Acrylic is Hard but flexible so it can be polished with buffing compound after 24 hours
Base Coat : PU Sanding Sealer PUSS - 91
Top Coat : PU Lacquer PUL - 91 (Clear Gloss/Semi Gloss/Dof)
Advantages :
• Non Non Yellowing
• Hard but flexible
• House-hold chemical resistant
• for Interior and eksterior
• Free Formaldehyde
• Can be polished ( > 24 hours)
• Imported hardener from Bayer®- Germany with free-isocyanate content less than 0.5%.
Packaging : 1 Liter Set, 5 Liter Set, and 25 Liter Set
.jpg)
.jpg)
Application Procedures :
- If necessary use IMPRA wood filler to fill the wood pores. Sand all wood surfaces with sand paper no. 240. remove all sanding dust.
- Use IMPRA wood stain for staining the wood.
- Aplly sanding sealer PUSS-91 (mixing ratio A:B: Thinner = 4:1:2 by volume) with coating amount 100-120 g/m2 by spray. Let it dry for 2-4hours. Sand with sand paper no. 400. repeat process for the second coat.
- Apply top coat PUL-91 (mixing ratio A:B:Thinner = 4:1:2 by volume) with coating amount 100-120 g/m2 by spray. Let it dry for overnight.
- Top coat available in clear gloss, semi gloss, and clear dof.
| PROPAN PU-91 | |
| Type | 2 component PU Acrylic Polyol |
| Color |
Sanding Sealer : Milky Top Coat : Clear Gloss, Clear Satin, Clear Dof |
| Application Condition | 25 – 30 °C, 40 – 60% RH |
| Mixing Ratio | 4 : 1 : 2 |
| Theoretical Coverage | 3.8 m?2;/ltr-set by spray at CA = 100g/m?2; (efficiency 40%) |
| Drying Time | 3 - 4 Hours |
| Hardener | PUH-31 NY FD |
| Thinner | Thinner Polyurethane |
