CERAKOTE CTC-998
CERAKOTE CTC-998 is package system for interior ceramic tile reconditioning in areas such as bathroom area, etc. Old ceramic tiles become new and clean again without removal. CERAKOTE CTC-998 consist of one set of Water Based primer coat (CTP-980 WB) and two set of Top Coat (CTC-998). CERAKOTE is made by high quality resin with excellent adhesion and good resistance against house hold chemicals such as : detergent, soap, cleaning fluids, etc
Features & Benefit :
• Consist of Waterbased Primer, no odor
• Excellent adhesion on ceramic tile
• Excellent water resistance
• Excllent scratch resistance
• Easy to apply, just brush and roll
Packaging : 3 lt-set
Application Procedures :
PRIMER COAT
- Clean ceramics tile surfaces to be painted from oil, dirt, crust, fungus, and other containants. Sand throughly. Surface must be dry before painting.
- Mix one set of Primer Coat (CTP-980 WB) with mixing ratio by weight Primer component A : Primer component B = 4 : 1. Stir until homogeneous. Can be thinning by water 5-10% (only when necessary). The mixture will harden in 60 minutes, mix as much as needed. Coverage is 10 m?2;/kgset per coat.
- Apply mixed material using roller / brush. To achieve smooth surface, use a good quality roller.
- After the primer (CERAKOTE CTP-980) is dry (minimum overnight), sand with sandpaper no. 400. Then, clean the dust of the sandpaper.
- Mix a set of CERAKOTE CTC-998 with the weight ratio of the comp. A: Komp. B = 4: 1. Dilute using 5-10% epoxy thinner, stir until smooth.
| CERAKOTE CTC-998 | |
| Type | Two water based epoxy primary components |
| Finish | Gloss |
| Material consumption | 11 m2 /lt-set (40 micron/layer) |
| Drying time |
Hard dry 12 hours (30° C) Full Cure 7 days |
| Packaging | 3 lt-set |
| Self Life | 1 year in unopened container |
| Thinner | Thinner Epoxy atau Thinner D |
| Application method | Epoxy roller or brush |
| Cleaning | After use, wash equipments immedaitely |
