FAST DRY EPOXY FLOOR COATING EP-95-2K FD
Propan EPOXY FAST DRY EP-95-2K FD is a new development from R&D Propan Raya. Fast dry epoxy floor coatings. Only 4 hours drying time and ready for use. Specially designed as top coat require 100-200 micron dry film thickness. Not only for floor coating, but also recommended for wall. Can be applied on concrete, metal, wood, gypsum, mdf board, concrete ceramic, etc
Product Characteristic :
- Fast dry
- Excellent water resistance
- Excellent adhesion to substrate
- Easy to clean
- Easy to use
-
Chemical resistance
Video Application :
Application Procedure :
- Clean the surface from dust, oil and other contaminants. Make sure the floor surface clean and dry before apply.
- Mix comp A and B with mixing ratio 2 : 1 by weight. Stir well ± minutes and apply the mixture by brush or roll.
- If necessary, mixture can be thinned with epoxy thinner 5-10%.
| EPOXY FAST DRY EP-95-2K -FD | |
| Type | Two Component Epoxy Fast Dry |
| Finish | High Gloss |
| Theorithical coverage | 4-5 m2/kg-set (±100 micron DFT) |
| Drying time |
Surface dry 2 hours (30° C) Full cure 4 hours (30° C) |
| Package | 1,5,12 kg-set |
| Shelf life | 1 years in unopened factory sealed container. |
| Diluent | Thinner Epoxy, 5%-10% |
| Application method | Roll, brush |
| Cleaning | Wash all equipments immediately with clean water, after use. |
