DUROGLOSS 8800 TURBO FAST DRY
DUROGLOSS 8800 TURBO FAST DRY is PU Clear Coat specially designed for coating work that requires fast drying time with high quality. PCR 8800 Turbo Fast Dry can be polished after 20 minutes of oven at 60ºC or after 2 hours of air drying at a temperature of about 30ºC so this product is suitable for small panel repair, has a very high gloss rate, high gloss resistance, UV resistance and Non Yellowing.
Features :
- Very quickly dry after application and speed up the polishing stage
- UV and Non-Yellowing resistant
APPLICATION PROCEDURES
Surface Preparation:
Application Preparation:
Application Stages:
Surface Preparation:
- Clean the surface from dirt and dust
- Surface sandpaper to be coated Clear Coat
Application Preparation:
- Mix the A and B compounds first before adding the thinner
- Dilute DUROGLOSS 8800 Turbo Fast Dry with PU slow / Medium Dry (PU Grade) thinner with ratio 80 : 20 : 20
- Stir until well blended and ready to spray on the panel
Application Stages:
- Spray DUROGLOSS 8800 Turbo Fast Dry 2-3 layers with a break time of 5 minutes each layer
- The surface will dry touch after 10 minutes and will harden after 8 hours
| DUROGLOSS 8800 TURBO FAST DRY | |
| Type | 2 Pack PU |
| Appereance | Clear Liquid |
| Drying time |
Surface Dry ± 5 minutes Hard Dry ± 2 hours |
| Packaging | 1Lt/set |
| Thinner | PU fast / Medium Dry (PU Grade) |
| Application Method | Spray |
| Substrate | Metal , Plastic and Wood |