DUROGLOSS PP PRIMER
DUROGLOSS PP PRIMER is a high quality acrylic 1K etching primer specially designed for polypropylene (PP) substrate. It is strongly recommended to finishing PP plastic part of motorcycle and car body in order to get excellent adhesion. This product supports any kind of finishing system in car body work and or refinish, both 1K and 2K.
Features Benefit :
- Good adhesion to plastic panels
- It won't peel off the paint on the plastic panel
- Good Hiding Power
Packaging : 1 Litre
Application Procedure :
Surface Preparation:
- Clean the surface of dirt, dust and oil attached to the plastic panel by using a thinner
- Surface sandpaper with grit paper of 800 - 1000 grit
Application Preparation:
Durogloss PP PRIMER is ready to be sprayed, because Durogloss PP PRIMER ready to use
Application Stages:
Spray Durogloss PP PRIMER 1-2 layers, a break time of 30 minutes to enter the next layer
| DUROGLOSS PP PRIMER | |
| Type | Acrylic Based |
| Appearance | Clear Liquid |
| Color | Slightly Yellowish |
| Solid content by weight | < 5> |
| Viscosity | 6 – 8 sec. D4 |
| Specific gravity | 0.86 ± 0.02 g/cc |
| Packing | 1 Lt in steel can (Ready to use) |
| Application method | Spray |
| Application viscosity | 6 - 8 sec DIN 4 |
| Surface dry | ~ 5 minutes |
| Recoating time | 5 minutes |
| Usage | Approx 1 liter for 9 m2 at a film thickness of 10 microns |