DUROGLOSS SPOT PUTTY
DUROGLOSS SPOT PUTTY is a versatile 1 component putty made from NC resin. Products used for layer putty or wood pores that can not be covered by Epoxy Filler or Surfacer coating. DUROGLOSS SPOT PUTTY is the right choice for the use of panels that fit the packaging that is practical and economical.
Features & Benefit :
- Effective close pore small pore
- Easy to apply
- The result of the application is hard and strong
Packaging : 200 cc
APPLICATION PROCEDURES
- Clean the panels that will be done from dust and dirt
- Make sure which spot to work on
- Apply Durogloss Spot Putty on the spot using a spatula
- Flatten on the panel until the pores are closed
| DUROGLOSS SPOT PUTTY | |
| Type | 1 tube Durogloss Spot Putty |
| Appearance | Colored Pasta |
| Total Coverage | 9 m2/ lt (depend on application) |
| Dry Time |
Surface dry 30 minutes Hard dry 1 hour |
| Packaging | 200 cc |
| Thinner (if necessary) | THNC 71100 ND |
| Application methode | wipe |
| Substrate | Metal, plastic, fiber and wood |