PROPAN HIGH FILLER EPOXY
PROPAN HIGH FILLER EPOXY is a versatile surfacer coating / Filler 2 component made of Epoxy resin which works to close the pores in the layer of putty because it has a high viscosity level with good build, smooth coating flow so easily sanded, good resistance to rust , and has excellent adhesion.
Adventages :
- Good sanding ability
- Good adhesion to substrate and or over the putty
- Good hiding power
- Short sanding time
Packaging : 1.3 Kg-set & 26 Kg-set
Video Training Product
APPLICATION PROCEDURES
Surface preparation
- The surface to be painted should be clean of dirt, dust, oil, rust, remaining old paint that is still attached and other contaminants
- Surface sandpaper with grit paper of 800 - 1000 grit
Product Application Preparation
- Mix the A and B compounds first before adding the thinner
- Dilute Propan High Filler Epoxy with thinner ND or HG with 1: 1 ratio
- Stir until well blended and ready to dispray on the panel
- Spray Propan High Filler Epoxy 2-3 layers with a break time of 5 minutes each layer
Final stage
- The surface will dry after 30 minutes
- For a more optimal protection and a more attractive appearance can be applied Durogloss basecoat with a variety of color choices
| PROPAN HIGH FILLER EPOXY | |
| Type | 2 Pack Epoxy |
| Color | Grey, White, Black |
| Theoetical Coverage | 5-6 m2/lt. at ca 100 g/m (tergantung kondisi permukaan dan teknik aplikasi) |
| Drying Time |
Kering Sentuh : 20 - 30 Menit Kering Sempurna : 100 - 120 Menit (tergantung suhu dan permukaan) |
| Packaging | 1.3 Kg-set & 26 Kg-set |
| Thinner | THNC-2711-ND |
| Application Method | Air Spray |
| Substrate | Metal, Plastics, Fiberglass, Aluminium, Wood |
| Shelflife | 60 Bulan jika disimpan pada tempat yang sejuk dan kering, dan kemasan dalam kondisi tertutup |
