ECOSHIELD ES - 600
ECOSHIELD ES - 600 Acrylic Exterior Shield is a decorative wall paint made from acrylic emulsion and special color pigment. ECOSHIELD Exterior Acrylic Emulsion Paint has low dirt pick up, good alkaline resistance, protection from weather, ultra violet light, fungus, mold, and algae, has bright colors, and excellent color retention. This product is designed for exterior wall such as brick work, cement plaster, concrete, gypsum board, GRC panel, etc.
Features & Benefit
Features & Benefit
- No added lead or mercury
- Fungus Resistant
- Color Shield
- Excellent Opacity
- East to apply and easy to dry
- Weather Resistant (until 4 years)
Packaging : 5 kg and 25 kg
Color Card
* .jpg)
Color Card
*
Video Training Product
APPLICATION PROCEDURE
1. Surface Preparation
Surface must be dry, clean, and free from dirt, grease, oil, and all contaminants. Clean any area that are affected by mold, moss, and fungus with FUNGICIDAL WASH.
2. Primer Coat
Eco Emulsion Alkali Resisting Primer EAR-4001 (Water Based), 1 coat (without thinning), or use
Decor Alkali Resisting Primer AS-310 (Solvent Based), 1 coat (without thinning) for surface with very high alkalinity.
3. Top Coat
ECOSHIELD Exterior Acrylic Emulsion Paint, 2 coats (thinning with 10 - 20 % clean water according to needs)
*Recoating Interval : Minimum 2 hours (at temperature of 30°C)
DATA TEKNIS PRODUK
| ECOSHIELD ES - 600 | |
| Tipe | Acrylic emulsion |
| Warna | Seperti terlihat di color card |
| Tampilan akhir | Matt |
| Kadar padatan dalam volume | 32 % |
| Berat jenis | 1.36 gr/cc |
| Daya sebar teoritis | 7.8 m2 / Kg ( 30 micron ) |
| Kecepatan kering |
Tergantung pada suhu dan kelembaban Kering permukaan = 1 Jam ( 30o C ) |
| Masa simpan | 1 Tahun jika tersimpan dalam keadaan sejuk dan kering serta kemasan tidak dalam keadaan terbuka (jangan disimpan dibawah titik beku) |
DATA TEKNIS APLIKASI
| Pengencer | Air bersih |
| Jumlah pengencer dalam volume | 10 - 20 % |
| Cara aplikasi | Kuas, roll, spray atau airless spray |
| Ketebalan lapisan cat basah | 80 micron atau 3.2 mil |
| Ketebalan lapisan cat kering | 30 micron atau 1.2 mil |
| Ketebalan lapisan cat kering yang direkomendasikan | 60 micron ( 2 x 30 micron ) |
| Selang waktu pengecatan |
Minimal 2 jam ( 30O C), sesudah lapisan film cat pertama kering Maksimum - |
