CONTRACTOR SUPER VALUE Acrylic Emulsion Paint CV-6500
CONTRACTOR SUPER VALUE CV-6500 is an interior decorative paint made from acrylic emulsion designed for interior wall and ceiling surfaces including brick work/ cement plaster, concrete, gypsum, GRC Panel, etc.
Anvantages :
- Easy to Apply
- Has Good Adhesion to Subsrates
- Good Hiding Power
- Fast Drying
APPLICATION PROCEDURES
Surface Preparation:
- The surface must be clean, dry, sound, and free from all contaminats. Newly build wall must be dry after 28 days old. Make sure moisture content/ dampness of wall ? 16% measured using protimeter appliance and wall alkalinity (pH) 7-8 measured using universal pH indicator.
- Removed all loose material or defective paint by thorough brushing and scraping using active fibre brush.
- Treat any areas affected by mould, algae, moss and lichens with PROPAN FUNGISIDAL WASH.
- Repair defects with suitable filler. Use sand and cement mix for large holes and crack. Allow to dry.
- It recommended to apply Contractor Super Value Alkali Resisting Primer VAR 6501 (1 x coat) before applying this coating.
Primer Coat:
Contractor Super Value Alkali Resisting Primer VAR 6501, 1 x coat .
Finish Coat:
CONTRACTOR SUPER VALUE Acrylic Emulsion Paint CV 6500 , 2-3 x coats.
Product Spesification :
| Type | Acrylic Copolymer |
| Color | White |
| Finish | Matt |
| Solid by volume | ±49.6% |
| Specific gravity | ± 1.68 g/cc |
| Theoritical Coverage | 10-12 m?2; / kg (per coat) |
| Drying Time | Surface dry=30 minutes ( 30 °C ) |
| Packaging | 5 Kg & 25 Kg |
| Storage Stability | One year if stored cool and dry in original not opened container (Do not store below freezing point) |
Application :
| Thinning ratio by Volume | 25-30 % Clean Water |
| Application tools | Brush, Roll, Air Spray or airless spray |
| Wet Film Thickness | 80-110 microns |
| Dry Film Thickness | 25-35 microns |
| Recoating Interval | Minimum 2 hours ( 30 °C ), when the first paint film already dry. |