ECOSAFE EE-4019
ECOSAFE interior wall paint with anti bacterial agent EE-4019 is an interior decorative paint made from acrylic emulsion which contains active ingredients that can inhibit the growth of bacteria, germs, and fungus. This product is designed for interior wall and ceiling surfaces including brick work/ cement plaster, concrete, gypsum, GRC panel, wood, plywood, etc.
Features & Benefit :
- Good adhesion to substrates
- Easy to Apply
- Fast Drying
- Good Hiding Power
- Available in many beautiful Colors
Packaging : 5 Kg & 25 Kg
APPLICATION PROCEDURES
1. Surface Preparation :
- The surface must be clean, dry, sound, and free from all contaminats. Newly build wall must be dry after 28 days old. Make sure moisture content/ dampness of wall ≤ 16% measured using protimeter appliance and wall alkalinity (pH) 7-8 measured using universal pH indicator.
- Removed all loose material or defective paint by thorough brushing and scraping using active fibre brush.
- Treat any areas affected by mould, algae, moss and lichens with PROPAN FUNGISIDAL WASH.
- Repair defects with suitable filler. Use sand and cement mix for large holes and crack. Allow to dry.
- It recommended to apply alkali resisting primer before applying this coating.
2. Primer Coating :
- ECO EMULSION Alkali Resisting Primer EAR-4001 (Water Based), 1 x Coat.
3. Finish Coat :
- ECOSAFE EE-4019 , 2-3 x Coats .
Product Spesification :
| ECOSAFE EE-4019 | |
| Type | Acrylic Copolymer |
| Color | As shown in the color card |
| Finish | Matt |
| Solid by volume | ±37 % |
| Specific gravity | ± 1.50 g/cc |
| Theoritical Coverage | 8-9 m2 / kg / coat |
| Drying Time | Surface dry = 1 hour ( 30 °C ) |
| Packaging | 5 Kg & 25 Kg |
| Storage Stability | One year if stored cool and dry in original not opened container (Do not store below freezing point) |
Application :
| ECOSAFE EE-4019 | |
| Thinning ratio by Volume | 10% Clean Water |
| Application tools | Brush, Roll, Air Spray or airless spray |
| Wet Film Thickness | 80-110 microns |
| Dry Film Thickness | 30-40 microns |
| Recoating Interval | Minimum 2 hours ( 30 °C ), when the first paint film already dry |