FESTIVA FT-7000
FESTIVA FT-7000 is an economical interior decorative paint made from acrylic emulsion and special color pigment. FESTIVA FT-7000 designed for interior wall and ceiling surfaces including brick work/ cement plaster, concrete, gypsum, GRC Panel, etc.
Features & Benefit :
- Easy to Apply
- Has Good Adhesion to Subsrates
- Good Hiding Power
- Fast Drying
- Available in many beautiful colors
- Smoother than competitors in the same class
Packaging : 4.5 Kg & 18 Kg
APPLICATION PROCEDURES
1. Surface Preparation :
- The surface must be clean, dry, sound, and free from all contaminats. Newly build wall must be dry after 28 days old. Make sure moisture content/ dampness of wall ≤ 16 % measured using protimeter appliance and wall alkalinity (pH) 7-8 measured using universal pH indicator.
- Removed all loose material or defective paint by thorough brushing and scraping using active fibre brush.
- Treat any areas affected by mould, algae, moss and lichens with PROPAN FUNGISIDAL WASH.
- Repair defects with suitable filler. Use sand and cement mix for large holes and crack. Allow to dry.
- It recommended to apply alkali resisting primer before applying this coating.
2. Finish Coat :
- FESTIVA FT-7000 , 2-3 x coats .
Product Spesification :
| FESTIVA FT-7000 | |
| Type | Acrylic Copolymer |
| Color | As shown in the color card |
| Finish | Matt |
| Solid by volume | ±46.5 % |
| Specific gravity | ± 1.68 g/cc |
| Theoritical Coverage | 8-10 m2 / kg / coat |
| Drying Time | Surface dry = 1 hour ( 30 °C ) |
| Packaging | 4.5 Kg & 18 Kg |
| Storage Stability | One year if stored cool and dry in original not opened container (Do not store below freezing point) |
Application :
| FESTIVA FT-7000 | |
| Thinning ratio by Volume | 10% Clean Water |
| Application tools | Brush, Roll, Air Spray or airless spray |
| Wet Film Thickness | 70-90 microns |
| Dry Film Thickness | 30-40 microns |
| Recoating Interval | Minimum 2 hours ( 30 °C ), when the first paint film already dry |