DURASAFE DS-880
DURASAFE DS-880 is 2K PU waterbased wall paint easy to clean with proven anti microbacterial effect, especially design for hospital ,operating rooms, health laboratories, ICU, radiology, and Physiotheraphy. Contains anti-microbial ingredients that are proven effective in preventing the growth of fungi and bacteria. In addition, it also has anti-stain properties and is easy to clean so that the room is always hygienic.
Advantages :
- Easy to clean
- Antimicrobacterial effect
- Stain and chemical resistant
- Alkali resistant
- Water resistant/water repellent
- Waterproofing effect
- Can be apply as one coat system
- Good coverage
- Easy to apply
- Provide celan and smooth surface
Packaging : 20kgset
APPLICATION PROCEDURE :
- Clean the surface of the wall to be applied from mold, mildew, dust, oil or other contaminant
- Mix well Component A and Component B with a ratio of 10:1, stir for 1 minute until evenly distributed
- Apply 1 (one) layer of DURASAFE DS-880, diluted with 10 - 20% clean water, apply using a roll. Then let this layer dry for at least 4 (two) hours.
- Repeat until the second and third layers (if the color of the second and third layers has not completely covered).
- Allow to dry for at least 6 hours, avoid contact with water and rain during the drying process to get maximum coating results.
| DURASAFE DS-880 | |
| Application Method | : Brush, roll |
| Thinning | : 10 -20% |
| Thinner | : Water |
| Theoritical coverage | : 6 m2/lt. at 60 mikron DFT |
| Drying time | : 4 - 6 hours |
