PROPAN EPOXY POTTING
Propan Epoxy Potting is a 2 component Epoxy compound that has good heat conductivity without electricity. Very suitable for protecting circuits, components, & electrical devices, can also applied in high heat resistance condition.
Feature & Benefit :
- Good heat conductor without conducting electricity
- Good fire resistant
- Good moisture & water resistant
- Good shock & impact resistant
- Can be applied on PC panels (Poly-Carbonat), PP, ABS, PVC, metal materials, or electrical component insulation (module power supply, & circuit board)
Packaging : 1 Kg Set (comp A :0.8 kg & comp B : 0.2 kg)
Application Procedures :
- Clean the electrical components surface from dirt, then make a mold around the electrical componets for casting process
- Mix component A & component B with a ratio of 4 : 1 (in weight)
- Stir the A & B component mixture thoroughly
- Pour / cast over the electric components that have been prepared evenly
- Wait to dry completely for 8 hours
| Parameter |
PROPAN EPOXY POTTING EPT-277-2K |
| Substrate | Metal / Electric Components |
| Application Method | Cast |
| Hardener (comp. B) | EPTH-277 PS |
| Mixing ratio (Weight) | 4 : 1 |
| Thinner | - |
| Drying Time | 8 hours |
| Sheen | - |
| Packaging | 1 Kg Set |
