POLYFLOOR SEALER
POLYFLOOR SEALER adalah cat epoxy dua komponen yang diformulasikan khusus sebagai pelapis dasar yang berfungsi sebagai penetrasi ke dalam substrat dan sebagai penguat adhesi / daya lekat lapisan cat di atasnya serta berfungsi sebagai penambah ketebalan film.
Polyfloor primer terdiri dari beberapa tipe dengan mempunyai pasangan top coat masing – masing.
1. Polyfloor primer PFP-211 Primer berjenis solvent free. Selain fungsi utama sebagai primer, PFP-211 juga biasa digunakan untuk proses pendempulan.
2. Polyfloor primer PFP-241 Primer berjenis solvent base. Dapat membentuk lapisan ketebalan film hingga 200 microns.
3. Polyfloor primer PFP-251 Primer berjenis solvent free. Dapat membentuk lapisan ketebalan film hingga 200 microns.
4. Polyfloor primer PFP-261 Primer berjenis solvent base. Bisa digunakan untuk primer di berbagai macam substrat dan bisa diaplikasikan pada bidang vertikal maupun horizontal.
5. Polyfloor primer PFP-281 Primer berjenis solvent base. Biasa digunakan untuk aplikasi pada keramik, terazzo dan sejenisnya. Tetapi juga bisa di aplikasikan pada jenis substrat beton. Mempunyai lapisan film yang lebih fleksibel dibandingkan dengan jenis primer lain.
6. Polyfloor primer PFP-291 AS Primer berjenis water base. Diformulasikan khusus untuk diaplikasikan di area yang berpotensi terdapat aliran listrik anti statis. Primer ini pada dasarnya akan menghantarkan aliran listrik statis kedalam tanah
Fungsi & Keunggulan :
- Daya lekat yang sangat kuat terhadap substrat
- Daya penetrasi yang baik
- Mudah diaplikasikan
Kemasan : 5 kg-set dan 20 kg-set
Prosedur Aplikasi
- Campur 1 (satu) set Polyfloor primer yang terdiri dari Komponen A dan B, aduk hingga homogen.
- Tuang campuran ke dalam substrat sebanyak 0,2 – 0,3 kg-set/m2, ratakan menggunakan squegee dan roll epoxy.
- Khusus untuk proses pendempulan (PFP-211), setelah proses pencampuran Komponen A dan B, tambahkan kalsium karbonat dengan perbandingan berat (A : B ) : kalsium karbonat = 1 : 3.
- Kemudian aplikasikan menggunakan kape atau alat sejenis lainnya.
- Tunggu 6 - 12 jam untuk pelapisan selanjutnya.
| POLYFLOOR EPOXY PUTTY PFP-211-2K PUTTY SF | |
| Color | Grey |
| Finish | Matt |
| Specific gravity (mix) | 1.50 ± 0.04 gr/cc |
| Solid by weight (mix) | 96 ±0.05% |
| Mixing ratio (by weight) | Comp A : Comp B = 4 : 1 |
| Pot life | 30 minutes |
| Storage stability | 24 months if stored cool and dry and in original packaging (not opened) |
| Flash point | Non flammable |
| Drying time |
Surface dry : 3 hours (30°C) Hard dry : 8 hours (30° C) Full cure : 7 days (30° C) |
| Application tools | Squeegee and metal trowell |
| Re coating interval | Minimum 12 - 16 hours (30°C) |
| Application temperature |
Minimum 20°C Maximum 40°C |
| Humidity maximum | 80 % RH |
| Material consumption | 0.15 - 2 kg-set/m2 |
| • Provide adequate ventilation during application and drying | |
| POLYFLOOR PRIMER MULTIPURPOSE SOLVENT BASED PFP-241-2K SB | |
| Color | Milky |
| Finish | Glossy |
| Specific gravity (mix) | 1.10 ± 0.04 gr/cc |
| Solid by weight (mix) | 76 ±0.05% |
| Packaging | 5 and 20 kg-set |
| Mixing ratio (by weight) | Comp A : Comp B = 4 : 1 |
| Pot life | 30 minutes |
| Storage stability | 24 months if stored cool and dry and in original packaging (not opened) |
| Flash point | Non flammable |
| Drying time |
Surface dry : 1 hours (30°C) Hard dry : 16 hours (30° C) Full cure : 7 days (30° C) |
| Application tools | Squeegee and epoxy roll |
| Re coating interval | Minimum 12 - 16 hours (30°C) |
| Application temperature |
Minimum 20°C Maximum 40°C |
| Humidity maximum | 80 % RH |
| Material consumption | 0.20 kg-set/m2 |
| • Provide adequate ventilation during application and drying | |
| POLYFLOOR PRIMER MULTIPURPOSE SOLVENT FREE PFP-251-2K SF | |
| Color | Clear |
| Finish | Glossy |
| Specific gravity (mix) | 1.10 ± 0.04 gr/cc |
| Solid by weight (mix) | 99 ±0.05% |
| Packaging | 5 and 20 kg-set |
| Mixing ratio (by weight) | Comp A : Comp B = 2 : 1 |
| Pot life | 45 minutes |
| Storage stability | 24 months if stored cool and dry and in original packaging (not opened) |
| Flash point | Non flammable |
| Drying time |
Surface dry : 3 hours (30°C) Hard dry : 16 hours (30° C) Full cure : 7 days (30° C) |
| Application tools | Squeegee and epoxy roll |
| Re coating interval | Minimum 12 - 16 hours (30°C) |
| Application temperature |
Minimum 20°C Maximum 40°C |
| Humidity maximum | 80 % RH |
| Material consumption | 0.15 kg-set/m2 |
| • Provide adequate ventilation during application and drying | |
| POLYFLOOR PRIMER WALL SOLVENT BASED PFP-261-2K WALL SB | |
| Color | White |
| Finish | Matt |
| Specific gravity (mix) | 1.30± 0.04 gr/cc |
| Solid by weight (mix) | 54 ±0.05% |
| Packaging | 5 and 20 kg-set |
| Mixing ratio (by weight) | Comp A : Comp B = 9 : 1 |
| Pot life | 30 minutes |
| Storage stability | 24 months if stored cool and dry and in original packaging (not opened) |
| Flash point | Non flammable |
| Drying time |
Surface dry : 15 minutes (30°C) Hard dry : 4 hours (30° C) Full cure : 7 days (30° C) |
| Application tools | Squeegee and brush |
| Re coating interval | Minimum 4 - 6 hours (30°C) |
| Application temperature |
Minimum 20°C Maximum 40°C |
| Humidity maximum | 80 % RH |
| Material consumption | 0.2 kg-set/m2 |
| Provide adequate ventilation during application and drying | |
| POLYFLOOR PFP-281-2K SB | |
| Type | Two component solvent based amine cured epoxy primer |
| Color | Light Grey |
| Finish | Semi Gloss |
| Solid by Volume (mixture) | ± 94% |
| Specific Grafity (mixture) | ± 1.40 gr/cc |
| Mixing Ratio by Weight | Comp A : B = 4 : 1 w/w |
| Material Consumption | 0.20 kg-set/m² |
| Flash Point | 25°C |
| Storage Stability | One year in cool and dry storage and in original not opened box |
| Pot life (30°C) | 45 minutes |
| Drying Time (30°C) |
Surface Dry : 2 hours Hard Dry : 12 hours Full Cure : 7 days |
| Application Method | Brush / roll |
| Re-coating Interval (30°C) | 12 - 16 hours until 7 days |
| Application Temperature | 10 - 40°C |
| Humidity Maximum | 80 % RH |
| Provide adequate ventilation during application and drying | |
| POLYFLOOR ANTI STATIC PRIMER PFP-291-2K AS WB | |
| Color | Black |
| Finish | Semi Gloss |
| Specific gravity (mix) | 1.10 ± 0.04 gr/cc |
| Solid by weight (mix) | 62 ±0.05% |
| Packaging | 5 and 20 kg-set |
| Mixing ratio (by weight) | Comp A : Comp B = 3 : 1 |
| Pot life | 45 minutes |
| Storage stability | 24 months if stored cool and dry and in original packaging (not opened) |
| Flash point | Non flammable |
| Drying time |
Surface dry : 2 hours (30°C) Hard dry : 10 hours (30° C) Full cure : 7 days (30° C) |
| Application tools | Roll, rubber squegee |
| Re coating interval | Minimum 12 - 16 hours (30°C) |
| Application temperature |
Minimum 20°C Maximum 40°C |
| Humidity maximum | 80 % RH |
| Material consumption | 0.20 kg-set/m2 |
| • Provide adequate ventilation during application and drying | |